[Mg-mmm] PA/NA front cam stand

[BOB GRUNAU]

Thanks Clive,
I am aware of that and would prefer to get the pair. So let me revise my
request for a pair, top and bottom, front cam stand for a PA/NA engine.

If I can find a bottom only, I expect to have to "fettle" the bore by
possibly changing the dowel pins and then line honing/boring all caps in
line.
Right now I have no bottom, so something to work with would help.

Now if you have a matching bottom and top surplus to your needs.  so much
the better.

I have on several occasions had to fit mis-match main bearing crank caps on
XPAG engines, no big deal, you get it as close as you can by filing one side
of the joint, then possibly brazing on  the other side to make up the
difference. then line bore. Works OK, just a nuisance.


NEW QUESTION:
Can someone please advise if all or any major parts of the MMM cars are
numbered to match the chassis?  I have found numbers on top of several rear
axle casings,  but these numbers do not seem to relate to the car.
Is the radiator numbered?
Radiator shell numbered?

The original bonnet hinge is obviously chassis numbered with the colour
coding. ,

Thanks to all that responded.
Bob Grunau
Canada

Try and get the matched pair,  two random halves often dont fit.

Clive

> Hi MMMers,
> Funny, I thought this morning that all MMMers were asleep as no emails for
> many weeks, and then the email from "down under" appeared re wheels.
>
> New topic, I have a spare PA almost complete engine and am looking for the
> lower half of the front cam pedestal for a P or N engine as they are the
> same part. I have the top half gear cover for the pedestal, just need the
> lower half. Anybody have a spare?
>
> Also looking for a foot operated starter switch for an MMM car. This is
> for
> my collection of parts to make a J2 Special, long term project but thought
> I
> would ask.
>
> MG KN0389 is safe and in a heated garage and some inspection work and
> planning has started. This is the ex Windom Estes KN 4 door pillarless
> from
> California now in Canada .
>
> Best regards from Canada where we still have had no appreciable snow this
> winter.
> Bob Grunau
> PA0531
> J3017
> NA0686
> KN0389