[Mgb-v8] EFI manifold

[Dodd, Kelvin]

Good question Bill. I havn't had a chance to try that. Maybe over the
weekend.

Kelvin Dodd



________________________________

	From: Bill Zenkus [mailto:mgb_zenkus at yahoo.com]
	Sent: Friday, October 16, 2009 12:34 PM
	To: Dodd, Kelvin; James J.; mgb-v8 at autox.team.net
	Subject: Re: [Mgb-v8] EFI manifold


	Hi Kelvin

	Is it possible to reverse the top so the throttle assembly, the
highest point is right at the rear?

	Just curious...

	Bill


	________________________________

	From: "Dodd, Kelvin" <doddk at mossmotors.com>
	To: James J. <m1garandusa at verizon.net>; mgb-v8 at autox.team.net
	Sent: Friday, October 16, 2009 3:01:46 PM
	Subject: Re: [Mgb-v8] EFI manifold

	James.

	I'm no expert, but I do have one of these sitting in my shop
still
	attached to a core 4.6 motor.

	The throttle assembly, the highest point is right at the front
which
	makes it a poor choice for the MGB. I don't think that you could
make it
	fit without a pretty big bonnet bulge.

	The long tracts were designed primarily for torque in the
original
	Range/Land Rover application, so again it's not the best setup
for an
	MGB where you will be more interested in higher revs.


	I am going to see if this will fit under the bonnet of a Rover
SD1, as
	it may be the perfect ticket for that application.


	>From what I understand, which usually isn't much. The larger
injectors
	can be installed in the hot wire manifold for a usable increase
in
	power, so the injectors themselves could be handy if the price
is right.


	Kelvin Dodd


	> -----Original Message-----
	> From: mgb-v8-bounces at autox.team.net
	> [mailto:mgb-v8-bounces at autox.team.net] On Behalf Of James J.
	> Sent: Thursday, October 15, 2009 9:21 PM
	> To: mgb-v8 at autox.team.net
	> Subject: [Mgb-v8] EFI manifold
	>
	> Is anyone familiar with this last iteration of Rover intake
	> manifold, and how it compares to the more common
	> trumpet-in-plenum design?
	> JJJ
	>
	> http://cgi.ebay.com/ebaymotors/USED-Land-Rover-Disco-II-4-6-En
	> gine-Parts_W0QQitemZ260485388864QQcmdZViewItemQQptZMotors_Car_
	> Truck_Parts_Accessories?hash=item3ca6239a40
	> _______________________________________________
	> Support Team.Net  http://www.team.net/donate.html
	>
	> Mgb-v8 mailing list
	>
	> You are subscribed as doddk at mossmotors.com
	>
	> Mgb-v8 at autox.team.net
	> http://autox.team.net/mailman/listinfo/mgb-v8
	_______________________________________________
	Support Team.Net  http://www.team.net/donate.html

	Mgb-v8 mailing list

	You are subscribed as mgb_zenkus at yahoo.com

	Mgb-v8 at autox.team.net
	http://autox.team.net/mailman/listinfo/mgb-v8