[Shop-talk] Millings and coatings

[Peter J. Thomas]

On 8/16/2018 7:44 AM, eric at megageek.com wrote:
> Last week I had a few tri-axles of millings delivered.  I used them to 
> patch a large area in my driveway that was dug up to remove an oil 
> tank years ago.  I also used the majority of them to create a new 
> 'road' in the back property.
>
> Yesterday I rented a vibratory roller to compact and smooth them out.
>
> My question is, is there something I should put on top of them to 
> protect them?  Would seal coating do anything?
>
> I don't care what it looks like, but if something will help the 
> millings stay together, I'll do it.  Any ideas?  What's been 
> successful for others?
>
> Thanks.
Usually the millings will eventually loosely stick together to form a 
semi permeable surface under the heat of the summer sun.  I'd just leave 
them as is.
>
>
>
> Sent from my Commodore 64 on a 2400 Baud Modem.
> Tech Viper
> "Be as beneficent as the sun or the sea, but if your rights as a 
> rational being are trenched on, die on the first inch of your 
> territory." Ralph Waldo Emerson
>
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/pj_thomas@comcast.net
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20180816/6d7e2ca4/attachment.html>