[Shop-talk] Fiddlin' with the wiring.....

[gsteve at hammatt.com]

Present conditions (shop electrical, all recently installed by certified
electrician):

I have a 220V/1phase 20A per leg circuit going to a small davit crane
mounted 

on the top if my office, inside my shop.  Used occasionally to lift light
loads for storage.

Desire:  convert an adjacent 110V 15A quadplex outlets box to one duplex
outlet 

remaining 15A while splitting the remaining duplex outlet to 2ea outlets,
20A each. 

In other words, splitting power off the 220V/20A circuit into 2 individual
outlets, 

110V/20A (utilizing sides A and B from the 220V source).

Here's the other situation, I want to insert a rotary switch A-OFF-B to
switch between 

Using ONLY the 220V circuit OR the 110V circuits.

Anyone have recommendations as to a recommended rotary chang over switch?

 

Does this make sense?  I'm sorry I'm not familiar with the correct
terminology here, but 

I hope I'm making some sense. 

 

Steve Hammatt

Mount Vernon WA USA

LeatherPlates.com <https://leatherplates.com/> 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20220927/b227fe26/attachment.htm>