[Shotimes] IAB/ISC gaskets

[Paul Nimz]

I've bought a high temp material from them too that works for exhaust
gaskets.  Used in boilers and stuff.

Paul Nimz
'97 TR SHO
'93 EG mtx SHO


----- Original Message -----
From: "Jim and Debbie Leyden" <jndleyden@mindspring.com>
To: <shotimes@autox.team.net>
Sent: Saturday, December 14, 2002 6:50 AM
Subject: Re: [Shotimes] IAB/ISC gaskets


> If those are paper gaskets you can purchase gasket material from NAPA or
> McMaster-Carr and cut out your own.  If you really want to go all out, you
> can also purchase gasket punches and make them look professional.
>
> Jim
> '93 MTX
>
>
>
>
>
> ----- Original Message -----
> From: <KICKINSHO@aol.com>
> To: <shotimes@autox.team.net>
> Sent: Friday, December 13, 2002 9:03 PM
> Subject: [Shotimes] IAB/ISC gaskets
>
>
> > Looking for gaskets for the IAB/ISC.  Have been told they're obsolete.
I
> did
> > find find both listed on SHOnut's site, although one is listed as being
> > obsolete, the other is not.
> >
> > Has anyone else needed to buy these?  If so, where did you go?  Is there
a
> > different part number or company that might have them?  Help.  Mine
> crumbled.
> >
> > Part #'s are:  E9DZ-9F670-A  (maybe on SHOnut's site)
> >                     E9DZ-9F670-B  (listed as obsolete)
> >
> > These are for my '93 ATX.
> >
> > Thanks,
> > Kris
> > '91+ White
> > '93 Ultra Red ATX
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes