[Shotimes] Pan drop

[sho2go]

Thanks for all the replies.  The MTX was somewhat of a pain, but you just
have to hold your mouth just right......I've looked and it appears to be the
main seal.  But then again, I thought so on my '90 and it turned out to be
the pan seal; it can be hard to tell.  It ticks me off; at 50K miles neither
should be leaking.
Mike

----- Original Message -----
From: "Paul L Fisher" <sho@paul-fisher.com>
To: "sho2go" <srfdude@cox.net>
Cc: <shotimes@autox.team.net>; <TechSHO@topica.com>
Sent: Monday, November 04, 2002 6:32 AM
Subject: Re: [Shotimes] Pan drop


>
> From people telling me how hard it is to get an MTX pan back on, I believe
the
> ATX is easier. It took me less than a minute to take the pan from off to
fully
> seated. There is one nut that is a PITA to get to. I ended up having to
buy a
> swivel socket to get to it.
>
> As for having to drop it to change the seal, I don't believe so. If you do
> have to, I would change the rod bearing while I'm in there.