[Shotimes] ninja clutch
don donelson
don donelson" <1badsho@thenuthouse.com
Fri, 15 Nov 2002 18:21:52 -0500
bob
I know who made the clutches ..... and I think the difference between a SP
High perf motorsport disc and pressure plate .... is that .. for the masses
... not everyone needs a clutch that will handle real race track conditions.
I had a clutch made by the same manufacuter 11 years later ... for my S/C
SHO ..... which was putting out 350 HP. The clutch they made for that car
was able to with stand $400 HP ..... and they built it for me as a favor ...
at there cost .... for the tune of $1400 ~
Just takes money !
dond
91 Super SHO II
Best part ... I did all the work & assembly : )
Engine runs like a scalded dog ! No leaks / No errors !
-3.2 ATX block
-FPS hi-flow heads w/ over sized valves
-Stage I cams
-SHONUT adjustable timing sprockets
-Ported intake & runners
-Ported and extrude honed exhaust manifolds
-Hi-flow catless Y pipe
-Hi-flow exhaust
-BBB
-SHO SHOP T.B.
-SHONUT phenolic spacers
-Quaife
-CAI
-UDP
****
-Cowl hood
-Momo 17x8 rims
-Police grill
-Custom two tone interior
-Complete sunpro gauges
oil temp / water temp / oil pressure
****
-Tokico shocks/Eibach springs
-Polyurethane at all corners
-Solid-sub frame bushings
-Frame stiffners
-Adjustable rear control arms
-Battery located in trunk for better weight distrubution
****
-12" rotors at all four corners
-Steel braided lines
----- Original Message -----
From: Robert Bruce <rbruce@bellatlantic.net>
To: <1badsho@thenuthouse.com>
Sent: Friday, November 15, 2002 5:35 PM
Subject: FW: [Shotimes] ninja clutch
> Don,
>
> Why don't you try to contact Lance Cook. He runs Woodstock Motorsport in
> Woodstock Vermont. He was very instrumental in building, maintaining and
> racing the Ninja SHOs. I hear that he still runs a repair shop in
> Woodstock. He may be able to offer some details about how the clutches
were
> race prepped or who did it.
>
> Robert Bruce
> 93 atx
> www.picturetrail.com/paracer
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of don donelson
> Sent: Friday, November 15, 2002 10:27 AM
> To: Mark Nunnally
> Cc: shotimes@autox.team.net
> Subject: Re: [Shotimes] ninja clutch
>
>
> Dang mark ......I didnt realize the Ninja clutch I got from Ninja team
....
> was that bullitt proof ! Can i have it back ! ha
>
> I bet they did make this clutch a little more durable ..... than the ones
> that SP sells.....
>
> Hey ... what are friends for though ~
>
>
> dond
> 91 Super SHO II
>
> Best part ... I did all the work & assembly : )
> Engine runs like a scalded dog ! No leaks / No errors !
>
> -3.2 ATX block
> -FPS hi-flow heads w/ over sized valves
> -Stage I cams
> -SHONUT adjustable timing sprockets
> -Ported intake & runners
> -Ported and extrude honed exhaust manifolds
> -Hi-flow catless Y pipe
> -Hi-flow exhaust
> -BBB
> -SHO SHOP T.B.
> -SHONUT phenolic spacers
> -Quaife
> -CAI
> -UDP
> ****
> -Cowl hood
> -Momo 17x8 rims
> -Police grill
> -Custom two tone interior
> -Complete sunpro gauges
> oil temp / water temp / oil pressure
> ****
> -Tokico shocks/Eibach springs
> -Polyurethane at all corners
> -Solid-sub frame bushings
> -Frame stiffners
> -Adjustable rear control arms
> -Battery located in trunk for better weight distrubution
> ****
> -12" rotors at all four corners
> -Steel braided lines
> ----- Original Message -----
> From: Mark Nunnally <manunnal@netheaven.com>
> To: don donelson <1badsho@thenuthouse.com>
> Sent: Thursday, November 14, 2002 8:43 PM
> Subject: Re: [Shotimes] Transmission rebuild video
>
>
> > What was odd was I had rochester clutch and brake build me another
clutch,
> > same as previous "ninja" only with a stronger disc (solid hub) same
> friction
> > material (velvatouch) but a full 9.75" disc. still a 9 puck, but the
> pucks
> > are bigger. Ran it on an 8 lb SS alum flywheel, but ran into slip
> problems.
> > Not sure if it's FW or clutch related, was going to try the old ninja on
> the
> > alum flywheel and see how that did.
> >
> > still, I've put about 30k on the old clutch, and it's still up for a
> > beating. I think it was like .310" thick when I put it in. Last time I
> had
> > it off it was like .280". But at the convention this year, on that
track
> > with the nitto drag radials it was barking 3rd HARD. Have run 100 hp of
> N20
> > on it, 12.9 @ 109 in the 1/4 on slicks. No slip at all.
> >
> > mark
> >
> > ----- Original Message -----
> > From: "don donelson" <1badsho@thenuthouse.com>
> > To: "Mark Nunnally" <manunnal@netheaven.com>
> > Sent: Thursday, November 14, 2002 1:52 PM
> > Subject: Re: [Shotimes] Transmission rebuild video
> >
> >
> > > thanks mark ... appreciate that ! ....
> > >
> > >
> > > Bay Harbor Ford
> > > Attn Don Donelson
> > >
> > > 1908 S McCall Rd
> > > Englewood, Fl., 34223
> > >
> > >
> > > dond
> > > 91 Super SHO II
> > >
> > > Best part ... I did all the work & assembly : )
> > > Engine runs like a scalded dog ! No leaks / No errors !
> > >
> > > -3.2 ATX block
> > > -FPS hi-flow heads w/ over sized valves
> > > -Stage I cams
> > > -SHONUT adjustable timing sprockets
> > > -Ported intake & runners
> > > -Ported and extrude honed exhaust manifolds
> > > -Hi-flow catless Y pipe
> > > -Hi-flow exhaust
> > > -BBB
> > > -SHO SHOP T.B.
> > > -SHONUT phenolic spacers
> > > -Quaife
> > > -CAI
> > > -UDP
> > > ****
> > > -Cowl hood
> > > -Momo 17x8 rims
> > > -Police grill
> > > -Custom two tone interior
> > > -Complete sunpro gauges
> > > oil temp / water temp / oil pressure
> > > ****
> > > -Tokico shocks/Eibach springs
> > > -Polyurethane at all corners
> > > -Solid-sub frame bushings
> > > -Frame stiffners
> > > -Adjustable rear control arms
> > > -Battery located in trunk for better weight distrubution
> > > ****
> > > -12" rotors at all four corners
> > > -Steel braided lines
> > > ----- Original Message -----
> > > From: Mark Nunnally <manunnal@netheaven.com>
> > > To: don donelson <1badsho@thenuthouse.com>
> > > Sent: Thursday, November 14, 2002 1:27 PM
> > > Subject: Re: [Shotimes] Transmission rebuild video
> > >
> > >
> > > > yeah the 5 speeds are pretty simple really, not much to them.
> > > >
> > > > send me your address and I'll send you a video. on the "house"
since
> > your
> > > > old ninja clutch literally will not die :o)
> > > >
> > > > as for parts, I'm all set!
> > > >
> > > > mark
> > > >
> > > > ----- Original Message -----
> > > > From: "don donelson" <1badsho@thenuthouse.com>
> > > > To: "Mark Nunnally" <manunnal@netheaven.com>
> > > > Sent: Thursday, November 14, 2002 1:05 PM
> > > > Subject: Re: [Shotimes] Transmission rebuild video
> > > >
> > > >
> > > > > mark
> > > > >
> > > > >
> > > > > how much for the video .... took my first tranny apart with our
> tranny
> > > guy
> > > > > next to me ..... wasnt that big of a deal ..... and i plan on
> > rebuilding
> > > > > these ....
> > > > >
> > > > > u need any parts ? :)
> > > > >
> > > > >
> > > > > dond
> > > > > 91 Super SHO II
> > > > >
> > > > > Best part ... I did all the work & assembly : )
> > > > > Engine runs like a scalded dog ! No leaks / No errors !
> > > > >
> > > > > -3.2 ATX block
> > > > > -FPS hi-flow heads w/ over sized valves
> > > > > -Stage I cams
> > > > > -SHONUT adjustable timing sprockets
> > > > > -Ported intake & runners
> > > > > -Ported and extrude honed exhaust manifolds
> > > > > -Hi-flow catless Y pipe
> > > > > -Hi-flow exhaust
> > > > > -BBB
> > > > > -SHO SHOP T.B.
> > > > > -SHONUT phenolic spacers
> > > > > -Quaife
> > > > > -CAI
> > > > > -UDP
> > > > > ****
> > > > > -Cowl hood
> > > > > -Momo 17x8 rims
> > > > > -Police grill
> > > > > -Custom two tone interior
> > > > > -Complete sunpro gauges
> > > > > oil temp / water temp / oil pressure
> > > > > ****
> > > > > -Tokico shocks/Eibach springs
> > > > > -Polyurethane at all corners
> > > > > -Solid-sub frame bushings
> > > > > -Frame stiffners
> > > > > -Adjustable rear control arms
> > > > > -Battery located in trunk for better weight distrubution
> > > > > ****
> > > > > -12" rotors at all four corners
> > > > > -Steel braided lines
> > > > > ----- Original Message -----
> > > > > From: Mark Nunnally <manunnal@netheaven.com>
> > > > > To: shotimes <shotimes@autox.team.net>
> > > > > Sent: Thursday, November 14, 2002 12:32 PM
> > > > > Subject: [Shotimes] Transmission rebuild video
> > > > >
> > > > >
> > > > > > Just a reminder, as I've gotten several questions about this
> lately.
> > > We
> > > > > > have a new how-to video, that covers rebuilding a SHO 5speed
> MTX-IV
> > > > > > transmission, as well as installing a quaife ATB differential.
> > > > > >
> > > > > > A lot of the questions have been "does this show how to remove
the
> > > > > tranny".
> > > > > > No, this video is sorta designed to be used with the clutch
video
> > > (sold
> > > > by
> > > > > > SHO NUT) which shows how to take off and replace the
transmission
> > (as
> > > > well
> > > > > > as replace the clutch). Josh T. from SHO NUT hosts both the
> clutch,
> > > and
> > > > > the
> > > > > > MTX video. The MTX video is 2 hrs long, and goes bolt by bolt
in
> > > > regards
> > > > > to
> > > > > > rebuilding a 5 speed. A lot of folks ask is this something they
> can
> > > do,
> > > > > > even with the video. My take is, if you can change a clutch
> > yourself,
> > > > > with
> > > > > > a helms and this video you can go through your tranny as well.
> With
> > > > lots
> > > > > of
> > > > > > SHO's getting shifting problems (worn blocking rings, etc) and
> > leaks,
> > > > this
> > > > > > is a great video for somebody just looking to put in new seals
and
> > > > rings,
> > > > > > even if you aren't doing a full out rebuild w/ a new
differential.
> > > > > >
> > > > > > These are available through myself for the near future, with SHO
> NUT
> > > > > selling
> > > > > > them fairly soon. If you are interested in getting a copy,
email
> me
> > > for
> > > > > > details.
> > > > > >
> > > > > > Hopefully that answers a few questions.
> > > > > >
> > > > > > mark
> > > > > > _______________________________________________
> > > > > > Shotimes mailing list
> > > > > > Shotimes@autox.team.net
> > > > > > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes