[Shotimes] Trouble with idle

[George Fourchy]

On Sat, 16 Nov 2002 13:59:18 -0600, Thesing, Hunter M. wrote:

>I read on the Shotimes that it could be a dirty connector to the MAF.  What would be
>the best way to clean it?  This totally stumps me.

There is a small filament in the MAF sensor that does the sending of voltages to the
computer.  This can be accessed by removing the screws holding it to the MAF, and
cleaning it with carb cleaner.  Other than this, you'll have to talk to MAF experts
on the list....I'm not much with experience in fooling with them beyond this step.

I sorta don't think this will have a lot to do with idle problems, however...airflow
is awfully slow through it at idle.

Good luck!!

George and the stock breathing Lowrider