[Shotimes] front air damn

[van Oss]

At a suggestion from Paul Nimx (iirc), I used a length of lawn edging to make a front dam on the 92.  The edging came with a round
shape on the top and a triangular shape on the bottom.  I used a table saw to cut off the round part, so the dam would have a
straight bottom (also easier to curve).  Also sawed off two faces of the triangle, leaving me with a T shape.  Had to cut the top
flange in a few places to allow it to curve at the corners of the car.  Mounted it to the front fascia using smalll screws and
plastic pieces.

On the 92, this job was easy because the lower edge of the fascia is straight across.  Some of the fascias I've seen have an extra
lip that sticks down on each side.  You'd have to figure out how to work the dam around those lips.

Joseph



----- Original Message -----
hey i'm wanting to construct a front air dam for my SHO, and i've seen pics of people that have done it, but i was wondering what
kind of material they used and where they got it,, some ricer here at my college did it but i really don't want to ask him b/c he
looks at me weird every time i ride up with my flowmasters,, i don't think he understands the SHO part,, anyway if anyone has any
ideas or has done this let me know

doug
95 red mtx