[Shotimes] PCV catch can

[Paul L Fisher]

Anybody know if this mod will kick me out of the STX class for autocrossing? 
After I get my intake clean, I don't want this swill coming back in.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 166K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley 
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus 
Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000 0W-30 
oil, Amsoil Synthetic ATF.
'00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 34K Build date 
11/19/1999
- Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit
'96 Saturn SL2 Silver Plum 5 spd 123K
- Amsoil Synthetic ATF, K&N Panel Filter, Magnecor 7mm Electrosports 70 
Ignition Cables

SHO Club member http://www.shoclub.com/
Check out my web site http://paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Quoting Paul Nimz <pnimz@v8sho.com>:

> I put a catch can for my PCV system in on my '97 last Friday.  It is
> 20"L x 3"
> and made of aluminum, has a baffle running the length of it and has both
> in
> and out the hoses on the same end but different sides of the baffle.  I
> have
> it mounted under the radiator horizontally.
> 
> Today I took the end off and got about a cup of liquid just slightly
> more
> viscous than gasoline.  Is this what you other catch can guys get?????
> 
> FWIW I have sealed off the make-up air for the PCV system.
> 
> Paul Nimz
> '97 TR SHO
> '93 EG mtx SHO
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes