[Shotimes] Heater Core ?s.

Kevin & Cheryl Airth clubairth@cajunnet.com
Fri, 25 Oct 2002 15:45:58 -0500


Heikki:
 It's the same as the regular Taurus. Be sure and pressure test the core
before replacing. I know! If you do replace it, pull back the dash from the
passenger side and do not remove it all the way. I removed the seats and
console and dropped the column to the floor. Extra help is a big plus. It's
awkward and easy to damage stuff! I only got a new rattle behind the
instrument cluster. It does not take much to break a vent or gouge the dash
itself up. as always have a Helms manual before starting.
Good luck it's a big job, I have changed ATX transmission's using jack
stands and a floor jack but the heater core is still the top.

> The time has come for me to replace the heater core in my SHO ('93 MTX).
It
> started blowing huge amounts of steam into my car yesterday morning so I
was
> forced to pull over and cut the hoses off the firewall and connect them to
> each other.  This steam situation was all taking place with the heat off,
> and only grew exponentially worse when I turned the heat on (I was just
> curious).  I am wondering if this is the same core as the non-SHO Taurii,
> and also if anyone has any suggestions or comments of experience.  Stay
away
> from these brands, don't be stupid and do this while installing it, etc...
> CCing replies to my email would be appreciated.  Thanks again for the
> expertise.
>
> -Heikki