[Shotimes] Re: help.....valve chatter and rod knock...
Paul Chapin
pchapin@houston.rr.com
Sun, 27 Oct 2002 11:14:33 -0800
> You replaced your mains? That sounds like a major PITA - you had to drop
> the engine and trans and remove the crank to get to the upper mains,
right?
>
You can replace the mains with the engine in the car. The upper on the oil
pump end was the hardest to do. Be sure to support the crank with a jack
when removing the front and rear main bearing cap so as not to damage the
oil seal.
Paul