[Shotimes] EEC-IV help

[Erik Balser]

Well Paul looks like you need to rerun your codes because they weren't
collected right but I think I can make some of them out.  Your got 6542 and
then 216542.  542 repeats and is definitely one of the codes.  Take the
second sequence and strip the 542 from it...Leaves you with 216... Code 216
= Coil 2 primary circuit failure, and if that code is correct, it could very
well explain why you seem to be missing on 2 cylinders!   The 33 might have
been the cylinder id that doesn't count as a code, just identifies that you
have a 6 cylinder engine.  For KOEO ignore everything inlcuding the fast
blips in the beginning until you get the first single 1 which indicates the
codes are about to begin.   Rerun the test and get back to us.

'95 MTX
masho95
http://home.attbi.com/~masho95

----- Original Message -----
From: "Paul Nimz" <pnimz@v8sho.com>
To: "`V6 SHOtimes" <SHOtimes@autox.team.net>
Sent: Wednesday, October 30, 2002 6:00 PM
Subject: [Shotimes] EEC-IV help


> My '93 is running very poorly.  The car will start OK but has a definite
miss
> and the tach is reading about 1/3 real value.  The miss is very steady and
I
> feel the engine is missing on at least 2 cylinders.  It was all I could do
to
> go 60 mph today against the wind.  :(
>
> I ran the KOEO test and got these codes....
>
> 1
> 33
> 1
> 6542
> 1
> 216542
>
> there was no pause between the flashes of the group 6542 and  the group
> 216542
>
> I know the 1 is a separator
>
> KOER
> 59
> 1
> 36
> 1
> 67
> 536
>
> There was no pause between the 67 and 536.  Help me please as I am
completely
> confused.
>
> Paul Nimz
> '97 TR SHO
> '93 EG mtx SHO
>
> With two sick SHOs
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes