[Shotimes] Gen3 seats in a Gen1?

[Bill Murray]

If you look at the link that Ron sent of Randy's car, he has the 3rd Gen
bottom half in, but the top half is the gen1.  You can tell by the
different shades and also the stitching is different compared to the top
half.

Bill Murray

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Paul Nimz
Sent: Thursday, October 31, 2002 1:07 PM
To: _SHOTIMES II; van Oss
Subject: Re: [Shotimes] Gen3 seats in a Gen1?

The Gen 3 rear bottom seat is 55"L x 23"H, the back is 58"L x 27"H.

Paul Nimz
'97 TR SHO
'93 EG mtx SHO


----- Original Message -----
From: <alfitz@alfitz.com>
To: "_SHOTIMES II" <shotimes@autox.team.net>; "van Oss"
<vanOss@centurytel.net>
Sent: Thursday, October 31, 2002 11:47 AM
Subject: Re: [Shotimes] Gen3 seats in a Gen1?


> I hope you appreciate this Joe, it is COLD and SNOWING, but I went out
and
> did some measuring.
> The width is NOT different between the GEN III and the GEN 1/2. The
bottom
> of the seat attaches in the same way, but I'm not sure if the attach
points
> are located the same.
> The back of the rear seat has a metal frame that must be attached to
the
> uni-body and I am not sure of what mods would be needed. When it warms
up
a
> little, maybe this weekend, I'll look at it further.
>
>
> Al Fitzgerald
> http://www.alfitz.com/sho
> NEW & USED SHO PARTS
> .
> SHO PARTS REQUEST FORM: http://www.alfitz.com/sho/parts-form.htm
>
>
> WE ACCEPT MasterCard or Visa
>
************************************************************************
****
> *******************************************
> NOTE: When replying to this email, please use your 'REPLY' button to
include
> the original message.
>
************************************************************************
****
> *******************************************
>
>
> ----- Original Message -----
> From: "van Oss" <vanOss@centurytel.net>
> To: <alfitz@alfitz.com>; "_SHOTIMES II" <shotimes@autox.team.net>
> Sent: Thursday, October 31, 2002 10:54 AM
> Subject: Re: [Shotimes] Gen3 seats in a Gen1?
>
>
> > The cutting you mention --- would that be absolutely required, or
would
it
> > be required only if one wanted to enjoy the "pass-through" feature?
I
> could
> > live without pass-through, I have for years.  Just ask my urologist.
> > <rimshot>
> >
> > Okay, the Gen3 rear seat bottom is wider.  [Must... not...
comment...
> on...
> > American... obesity...]   How much wider?  Enough to keep the rear
doors
> > from shutting?  Do the Gen3 rear seat mounts match up?
> >
> > Joseph
> >
> > ----- Original Message -----
> > There would be some major changes to fit the rear seat. You would
have
to
> do
> > some cutting of the supports under the rear deck. Also, the bottom
of
the
> > rear seat seems to be wider than the GEN 1/2. I'm sure it could be
done
> and
> > would be VERY nice for the 'pass through' feature, although the
front
> seats
> > look like they belong in the SHO even with the GEN 1/2 rear seats.
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes



---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.408 / Virus Database: 230 - Release Date: 10/24/2002
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.408 / Virus Database: 230 - Release Date: 10/24/2002