[Shotimes] Canister at back of manifold

[Bruce Malachuk]

I think thats the thing that controls the vacuum for the opening and closing
of your secondaries. If there is a tear you might not get full opening or
closing. Possibly a wierd idle and leaning out of the mix a little cause of
unmetered air getting in.

Bruce
94 Opal Frost MTX
94 Deep Emerald Green ATX - w/90k gonna be parted

----- Original Message -----
From: "Erik Balser" <masho95@charter.net>
To: <shotimes@autox.team.net>
Sent: Tuesday, April 15, 2003 9:55 PM
Subject: [Shotimes] Canister at back of manifold


> Can anyone tell me what the canister is for at the back of the manifold?
> Appears to have to vacuum (?) lines attached to it with one of them being
> about 3 inches long in the shape of a "U" directly connecting to the
intake
> manifold.  That one line has a slight tear in it.  What effect if any
would
> this tear have? Small vacuum leak? Incorrect idle? Thanks
>
> '95 MTX
> Erik B.
> http://webpages.charter.net/masho95
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes