[Shotimes] Re: Timing Belt/Timing chain

[James F. Ryan III]

> I can take that one step further.  The engine attached to a bellhousing
> (normal) but the Differential was bolted to the other side of the
> bellhousing and the transmission was bolted in front (towards the front of
> the car) of that.  The transmission input shaft ran through the
> differential.  So, if you think that the rear of the engine is where the
> transmission mounts...  Where does THAT leave you?


EXACTLY!!!  Where DOES it leave us, the front or the rear?   :^)



Jim Ryan
Wayne, NJ
'91 Plus - all white/mocha with fiberglass hood, rod shifter, & rear spoiler

255 Lph fuel pump, SHO Shop can & horn, 80mm MAF, S&B cone filter, SHO Shop
HiFlow Y-pipe & cat-back exhaust, SHO Shop LPM, SHO Shop underdrive pulleys,
SHO Shop HiRevs Jr clutch & steel billet LiteWeight flywheel, reinforced
engine & trans mounts, SHO Shop TQ limiters, SHO NUT aluminum SFBs, FPS '96
SHO front brakes, Carbotech F brake pads, Nook's full-body SFCs, Koni adj
struts, SHO Shop linear springs, 24mm FSB, 26mm RSB, SHO Shop steel f&r
STBs, Bridgestone Potenza RE-730 225/55-16, CATZ MSP fog lights, police
grille