[Shotimes] rod bearings

[Ian Fisher]

What can I say? I'm at the top of my game!

:D

Ian




-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Bruce Malachuk
Sent: Monday, April 28, 2003 3:26 PM
To: Ian Fisher; 'Kerry Kinion'; Shotimes@autox.team.net
Subject: Re: [Shotimes] rod bearings


Damn Ian you're too quick. I was just getting the full link to kurt's
writeup and BLAM you point that out to Kerry.

well here is goes anyway

http://www.kurtmetros.com/bearings.html

Bruce
94 Opal Frost MTX
94 Deep Emerald Green ATX - w/90k gonna be parted

----- Original Message -----
From: "Ian Fisher" <ianf@eden.rutgers.edu>
To: "'Kerry Kinion'" <kerry@kinionfurniture.com>;
<Shotimes@autox.team.net>
Sent: Monday, April 28, 2003 3:05 PM
Subject: RE: [Shotimes] rod bearings


> www.kurtmetros.com
>
> Has an excellent write-up
>
> If that sound has been going on for that long, you might not be able 
> to get away with just swapping for standard sized bearings..
>
> Ian
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net 
> [mailto:shotimes-admin@autox.team.net] On Behalf Of Kerry Kinion
> Sent: Monday, April 28, 2003 2:44 PM
> To: Shotimes@autox.team.net
> Subject: [Shotimes] rod bearings
>
>
> Hi All,
>
> Well, I hooked up with Josh S. this weekend and thinks the ticking 
> noise is rod bearings.  Question is:  Is there any links to step by 
> step instructions (w/pictures ideally) for replacing rod bearings?  I 
> couldn't find anything on ShoTimes.
>
> Thanks!
>
> Kerry
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes