[Shotimes] rod bearings

[Josh Salaets]

> Don't over-think this.  :)  Just buy the standard bearings and throw them
in
> there.  Follow the instructions on Kurt's site.

That's pretty much how I did mine.  The earlier recommendation to use some
sort of lube on the new bearings is VERY important.  I used 5W-30 engine oil
to coat the bearings when installing them, and in hindsight I probably
should have used real engine assembly lube.  I've had no problems though in
15K+ miles.

Josh Salaets
95 SHO MTX (See it at: www.cardomain.com/id/sh0gun)
85 Omni GLH-T (Yeah, it's fast)
NWSHOC Member
Aloha (Portland), OR