[Shotimes] TPS Fault Code

[shewitt@hypercon.net]

My guess would be a frayed wire at the connector.  It 
makes contact while cold, and breaks contact when it warms 
up.  Inspect the wires going into the connector, and look 
for nicks in the wire elsewhere.  Might be a tough one to 
track down...  Try the wiggle test before it sets a code, 
maybe you can isolate it that way.

Scot H
95 Red MTX - 67k
Lewiston, NY

On Fri, 1 Aug 2003 11:42:47 -0500
  "Jacob Cassidy" <jcassidy1@hot.rr.com> wrote:
>I got the good ole CE light this week. Checked the KOEO 
>test and it came
>back as TPS out of range parameters. KOER yields the same 
>result. So I
>went and got a new one from O'Reilly's and it seemed to 
>be doing fine
>until the engine really warmed up. Then the CE light came 
>back on while
>running 70 mph or so down the road. I got it home and 
>KOEO read TPS out
>of range parameters again. Any clue what is still causing 
>this? I've
>checked for vacuum leaks and made sure all hose 
>connections were good.
>Other than that I am at a loss. 
>  
>Jacob Cassidy
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes