[Shotimes] Flooded engine
Bruce Malachuk
bmalach1@nycap.rr.com
Wed, 6 Aug 2003 17:19:09 -0400
nah it was only flooded with gas for about 5 min or so. Most of the issues I
think were related to the berrymans that was in the cylinders. Took a while
to get it to kick and stay running. but she runs now. Think I killed an O2
sensor though, get a check engine light and a KOER code of 136 (lean while
running bank 2) so I think I'm gonna be replacing them if it shows up again
after a little more running around town.
Which one is bank 2? Thats right hand of the engine so in my mind it's
saying the front O2 sensor is SHOt. Ahh the price I paid for almost clean
valves. I got alot off of them with the berrymans soaks. The one odd thing
that I think might be kicking the car to show lean on the RH bank is thats
the one side I got finished with the porting. I needed an intake back on my
car for the day. I'm wondering if that might just be causing the leaning
out. Hmmm
Think I'm gonna make a day of doing the rod bearings, changing the O2
sensors, if needs be.
Bruce "These Valves are Clean!!!!...but I broke something else" Malachuk
94 Opal Frost MTX
93 Black ATX - winter beater then parts car :-)
----- Original Message -----
From: "Jonathan Zane" <jonzane@kc2ena.com>
To: <shotimes@autox.team.net>
Sent: Wednesday, August 06, 2003 4:35 PM
Subject: RE: [Shotimes] Flooded engine
> How long was it flooded. Please tell me that you changed the oil before
> cranking.
>
> Jon
>
>
> > -----Original Message-----
> > From: shotimes-admin@autox.team.net
> > [mailto:shotimes-admin@autox.team.net] On Behalf Of Bruce Malachuk
> > Sent: Wednesday, August 06, 2003 2:43 PM
> > To: SHOtimes
> > Subject: [Shotimes] Flooded engine
> >
> >
> > How can I get an engine started that was flooded with gas and
> > berrymans. The berrymans that might have slipped down into
> > the cylinders was pumped out, and I cranked the car with the
> > DIS disconnected for about 20sec to build up some oil
> > pressure as I figured that the berrrymans might be washing
> > the cylinders clean.
> >
> > Now I'm holding the pedal to the floor to cut the injectors,
> > it's close to catching but not quite. Any suggestions?
> >
> >
> > Bruce
> > 94 Opal Frost MTX
> > 93 Black ATX - winter beater then parts car :-)
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes