[Shotimes] Flooded engine

[Paul L Fisher]

It took me 10-15 tries to get it started after de-gunking my intake. I
didn't touch the gas pedal.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 175K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from PayPal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message ----- 
From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Wednesday, August 06, 2003 2:43 PM
Subject: [Shotimes] Flooded engine


> How can I get an engine started that was flooded with gas and berrymans.
The
> berrymans that might have slipped down into the cylinders was pumped out,
and
> I cranked the car with the DIS disconnected for about 20sec to build up
some
> oil pressure as I figured that the berrrymans might be washing the
cylinders
> clean.
>
> Now I'm holding the pedal to the floor to cut the injectors, it's close to
> catching but not quite.  Any suggestions?
>
>
> Bruce
> 94 Opal Frost MTX
> 93 Black ATX - winter beater then parts car :-)
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.507 / Virus Database: 304 - Release Date: 8/4/2003