[Shotimes] O2 Sensor

[Steve Weinrich]

Generally, sensors should be interchangeable provided that the harness is
long enough and they both have the same number of wires.

Just put some duct tape over that pesky CEL bulb.

Steve


----- Original Message -----
From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Wednesday, August 06, 2003 9:36 PM
Subject: [Shotimes] O2 Sensor


> Can I interchange an ATX O2 sensor for for the sensor on the front (RH)
side
> of the engine on my 94 MTX? Its intermitantly showing that its running
lean
> and I have 2 perfectly good ATX sensors sitting here, and I'd like to have
the
> car at least not kick a CEL while driving.
>
>
> Bruce
> 94 Opal Frost MTX
> 93 Black ATX - winter beater then parts car :-)
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes