[Shotimes] O2 Sensor

[Bruce Malachuk]

Nah that would detract from the interior too much. I killed the sensor
myself with too much berrymans when I was cleaning my intake and trying to
get the car started. I don't think it's totally dead, but just hiccups now
and then. I'm about due for new ones anyway at 90k. But I hope to be putting
in a 3.2 before 100k :-)

Bruce
94 Opal Frost MTX
93 Black ATX - winter beater then parts car :-)

----- Original Message ----- 
From: "Steve Weinrich" <stevwein@swbell.net>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Wednesday, August 06, 2003 10:44 PM
Subject: Re: [Shotimes] O2 Sensor


> Generally, sensors should be interchangeable provided that the harness is
> long enough and they both have the same number of wires.
>
> Just put some duct tape over that pesky CEL bulb.
>
> Steve
>
>
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "SHOtimes" <shotimes@autox.team.net>
> Sent: Wednesday, August 06, 2003 9:36 PM
> Subject: [Shotimes] O2 Sensor
>
>
> > Can I interchange an ATX O2 sensor for for the sensor on the front (RH)
> side
> > of the engine on my 94 MTX? Its intermitantly showing that its running
> lean
> > and I have 2 perfectly good ATX sensors sitting here, and I'd like to
have
> the
> > car at least not kick a CEL while driving.
> >
> >
> > Bruce
> > 94 Opal Frost MTX
> > 93 Black ATX - winter beater then parts car :-)
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes