[Shotimes] Where do coolant lines pass thru the firewall?

[Steve Weinrich]

Directly behind the intake manifold above cylinders # 2 and 3.

Removal of the factory clamps and replacement with stainless screw clamps is
suggested.  Just don't screw up the heater core copper tubes whilst mucking
about there... (BTDT, 2nd heater core in a year)...

I use a 1/4" drive ratchet, extensions, u-joints, as required.

A flashlight and inspection mirror are handy for checking for leaks at the
connections.

Steve



----- Original Message -----
From: "Jim Heaton" <aa8rf@yahoo.com>
To: "SHOTimes" <shotimes@autox.team.net>
Sent: Wednesday, August 06, 2003 9:30 PM
Subject: [Shotimes] Where do coolant lines pass thru the firewall?


> I would like to tighten up the clamps on the lines to
> and from the heater core where they go thru the
> firewall. Where are the clamps and what is the best
> way to access them?
>
> -Jim
> '89 Mad Max Black SHO
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes