[Shotimes] SHO vs 5.0 Head Flow Rate; was RE: MAF connector question

[Paul Nimz]

Ok, but say for instance on a V8 with it's segregated intake valves, if one
was to make the secondary valve bigger.  This is only open to the intake
tract above 3400 rpm when the IRM is open.

Paul Nimz
'97 TR
'93 EG mtx


----- Original Message ----- 
From: "Alan Fanning" <Awfanning@earthlink.net>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Sunday, August 17, 2003 1:17 PM
Subject: [Shotimes] SHO vs 5.0 Head Flow Rate; was RE: MAF connector
question


> When you open up the flow diameter, the velocity will _decrease_. Total
flow
> rate at the same vacuum will increase, providing better high rpm power.
But
> you loose it at the low end due to the lower flow velocities.
>
>     Alan
>
> > If the valve size is increase say ~20% and the intake is mildly P&Ped
then
> > the velocity would be increased correct?
> >
> > Paul Nimz
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes