[Shotimes] no turn signals -- new multifunction switch

[Kevin & Cheryl Airth]

Eric:
 Fuse #5 under the dash runs the turn signals. This is for 92 you didn't say
what year yours is? Yes the hazards and turn signals both use the same
flasher. The hazards are on fuse #1. If the fuse is good then MFS again? Did
you get a new one?
.
.



 my turn lights didn't
> work.  I just replaced the multifunction switch, and
> no joy on the turn signals.  Since the hazards work, I
> take it the flasher is good, or am I looking at things
> wrong?  Did I leave a ground wire off?
>
> Anyone know the answer to this riddle?
> Thanks,
> Eric