[Shotimes] Alignment Products, Problems to begin with
Kirk Doucette
Kirk.doucette@verizon.net
Tue, 9 Dec 2003 01:27:01 -0500
The factory towers have plenty of adjustment, when you buy this kit you have
to IIRC drill out the same meat out of the tower to install the kit, as you
would to get an good alignment out of the factory towers.
I don't know the Degree to inch conversion table, but you can get an 3/8 of
an inch movement on the tops of the towers. On my Gen 3 (lowered a little
bit) I had to get this thing fixed. I was at Neg camber 2.5 or a little
Higher, Im right in Spec now with just a little fancy Carbide Bit doing the
talking. Spec according to Gary M anyway..
Kirk J Doucette
NESHOC President
Stormtrooper-97 White
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]On
Behalf Of Johnsho92
Sent: Tuesday, December 09, 2003 12:48 AM
To: Mike Murphy; jcassidy1@hot.rr.com; shotimes@autox.team.net
Subject: [Shotimes] Alignment Products, Problems to begin with
Hello,
has anyone has any expeirnce and would like to share
about this particualar Front-Camber kit?
1) Install the Specialty Products front camber kit
#89625 to gain more
> positive camber adjustment.
This was quoked from the FAQs under one the articles..
I went to the site, and they dn't have the info on
file, but they do have three Kits for rear camber..
One wasm particularly odd, they basically have a
template to drill new holes for the strut-Mount-Studs,
marked by #s representing degrees of change.. How
interesting. Would the front setup seem similar? is
it safe to drill through the Strut-Towers?
Thanks..
I'm looking towards this becuase my my Front camber
with new OEM springs that are hieghten about 2 1/2
inches, I think the codes are JJWW, which JJs are
fronts. Still I have too much negative Camber.. :(
Cambers-
Drivers:-0.4 Passngr: -1.7
I don't think it's a big deal, but then again I don't
know why they're so non-symetrical. I've changed the
struts and all, inspected them agian to make sure it;s
not bent to my knowledge.. Weird!
thanks a lot..
-john
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes