[Shotimes] 90' GEN-I MTX Cable Shifter Box, woes.

[Kirk Doucette]

Know what I found to work good was an old spark plug boot.

Kirk J Doucette
NESHOC President
Stormtrooper-97 White

-----Original Message-----
From: Kerby Haltom [mailto:kerbyh@netzero.net]
Sent: Sunday, December 21, 2003 12:03 PM
To: Kirk Doucette; Ron Porter; shotimes@autox.team.net
Subject: RE: [Shotimes] 90' GEN-I MTX Cable Shifter Box, woes.

Actually, mine broke about 2 weeks before Tulsa.  Spent a Saturday locating
the clip.  Then 20 minutes putting everything back together.  Been working
ever since.  I need to put the piece of fuel line in there, next time I
have the chance.

Kerby

At 12:06 AM 12/21/03 -0500, Kirk  Doucette wrote:
>Did you break yours at Tulsa or did you fix someone's there?
>
>Kirk J Doucette
>NESHOC President
>Stormtrooper-97 White
>
>-----Original Message-----
>From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]On
>Behalf Of Kerby Haltom
>Sent: Saturday, December 20, 2003 9:51 PM
>To: Ron Porter; shotimes@autox.team.net
>Subject: RE: [Shotimes] 90' GEN-I MTX Cable Shifter Box, woes.
>
>Yep.
>
>Been using one for 3 years now...
>
>Kerby
>
>At 06:35 PM 12/20/03 -0500, Ron Porter wrote:
> >Is this where the Mopar clip (part 04340118) comes into play??
> >
> >Ron Porter
> >
> >-----Original Message-----
> >From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
> >On Behalf Of Johnsho92
> >Sent: Saturday, December 20, 2003 5:46 PM
> >To: Rick Glass; Tim Dahm; kickinsho; George Fourchy;
>shotimes@autox.team.net
> >Subject: [Shotimes] 90' GEN-I MTX Cable Shifter Box, woes.
> >
> >
> >Hello,
> >
> >My 1990 Black MTX has been stuck in reverse for quite
> >some time now, it turns out it's one of the linkage
> >that is in the Shifter itself.  I looked at it and it
> >seems to be fairly easy to fix.  but Ford, nor no one
> >so far can help me.  The want me to buy a whole new
> >cable, ~$280 bux.. :(
> >
> >It's just a rubber bushing which holds the Eye of the
> >Cable to the Ball-joint of the Shifter Handle, thus
> >cupping the bushin onto the Ball-joint.   simple you
> >would think.
> >
> >I'm asking if anyone knows what I am referring to as
> >well as where I can possibly get a bushing that will
> >work with this setup..
> >
> >Again, there's two calbes, one is called something of
> >Cross-Shift-Cable, the other one is
> >Engagement-Shift-Cable.  The one which goes into gears
> >is the one I'm having issues with..
> >
> >any Help?  Thanks a bunch! :)
> >
> >-John Wong
> >
> >
> >__________________________________
> >Do you Yahoo!?
> >Free Pop-Up Blocker - Get it now
> >http://companion.yahoo.com/
> >_______________________________________________
> >Shotimes mailing list
> >Shotimes@autox.team.net
> >http://www.team.net/mailman/listinfo/shotimes
> >_______________________________________________
> >Shotimes mailing list
> >Shotimes@autox.team.net
> >http://www.team.net/mailman/listinfo/shotimes
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes