[Shotimes] 89 SHO Idle Issues - Help Please
Paul Nimz
niks@dialnetwork.com
Wed, 31 Dec 2003 00:14:39 -0600
Be sure to check for vacuum leaks too.
Paul Nimz
'97 TR
'93 EG mtx
----- Original Message -----
From: "Epperly" <epperly1@optonline.net>
To: <shotimes@autox.team.net>
Sent: Tuesday, December 30, 2003 3:41 PM
Subject: Re: [Shotimes] 89 SHO Idle Issues - Help Please
> It not bad if you use a 5" long 3/8" drive allen wrench. With an extension
> on the allen place the wrench under the snakes add another short extension
> and ratchet away. Use some never-seize on the bolt when replacing.
> Ken
>
> > My instinct is that the problem will be an Idle Speed Control valve
fault
> > (or its associated electronics from the PCM). The ISC costs about $55
> from
> > AutoZone and is not too terribly difficult to replace. Well, that
bottom
> > screw is - it takes a LOT of Allen wrench repositioning. AZ refers to
it
> as
> > the "Throttle Air Bypass" valve.
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes