[Shotimes] Hard start...sensor related?

Paul Chapin pchapin@houston.rr.com
Sun, 9 Feb 2003 13:39:54 -0800


I meant will not start.

paul
----- Original Message -----
From: "Paul L Fisher" <sho@paul-fisher.com>
To: "Paul Chapin" <pchapin@houston.rr.com>
Cc: <shotimes@autox.team.net>
Sent: Sunday, February 09, 2003 11:28 AM
Subject: Re: [Shotimes] Hard start...sensor related?


>
> Huh? I think you mean that holding it WOT stops the fuel injectors from
> injecting fuel. It will still crank.
>
> Paul L Fisher
> '93 Ford Taurus SHO Crimson Clearcoat ATX 170K Build date 11/18/1992
> - K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back,
Holley
> 190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
> Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000
0W-30
> oil, Amsoil Synthetic ATF.
> '00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 39K Build date
> 11/19/1999
> - Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit
>
> SHO Club member http://www.shoclub.com/
> Check out my web site http://www.paul-fisher.com/
> Amsoil dealer http://www.paul-fisher.com/oil.htm
>
> Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
>
>
> Quoting Paul Chapin <pchapin@houston.rr.com>:
>
> > > Holding the gas pedal down doesn't seem to help any because I've
> > been
> > trying
> > > it and it doesn't seem to work.
> >
> > Holding the pedal to the floor will keep it from cranking, at least on
> > most
> > cars. The ones that crank with the peddel to the floor may not be
> > registering WOT.
> >
> >
> > >
> > > Cam position sensor is a new item, worked great on the old motor
> > then
> > swapped
> > > to this one.
> > >
> > > Fuel pump had no problem with the old motor and the problem came up
> > the
> > first
> > > time I tried to start the new motor(not ruling it out, just saying
> > it'd be
> > > weird to have it go bad during an engine swap).
> >
> > Use a bright light and watch the area of your fuel injectors. If there
> > is
> > any fuel leaking it will make it hard to start. Of course you would
> > probably
> > smell the gas if it were leaking.
> >
> > Will a sticking IAB make it hard to start?
> >
> > Paul
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes