[Shotimes] Hard start...sensor related?

[Paul L Fisher]

Huh? I think you mean that holding it WOT stops the fuel injectors from 
injecting fuel. It will still crank.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 170K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley 
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus 
Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000 0W-30 
oil, Amsoil Synthetic ATF.
'00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 39K Build date 
11/19/1999
- Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6


Quoting Paul Chapin <pchapin@houston.rr.com>:

> > Holding the gas pedal down doesn't seem to help any because I've
> been
> trying
> > it and it doesn't seem to work.
> 
> Holding the pedal to the floor will keep it from cranking, at least on
> most
> cars. The ones that crank with the peddel to the floor may not be
> registering WOT.
> 
> 
> >
> > Cam position sensor is a new item, worked great on the old motor
> then
> swapped
> > to this one.
> >
> > Fuel pump had no problem with the old motor and the problem came up
> the
> first
> > time I tried to start the new motor(not ruling it out, just saying
> it'd be
> > weird to have it go bad during an engine swap).
> 
> Use a bright light and watch the area of your fuel injectors. If there
> is
> any fuel leaking it will make it hard to start. Of course you would
> probably
> smell the gas if it were leaking.
> 
> Will a sticking IAB make it hard to start?
> 
> Paul
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes