Handling was [Shotimes] RE: supercharging

[Dave Kegel]

Are you referring to adding a front bar to your SHO or SE below?  If you're
referring to the SHO, a 94 MTX SHO almost certainly already has a 24mm front
bar.

Dave Kegel

----- Original Message -----
From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
To: "Ian Fisher" <ianf@eden.rutgers.edu>; "'Midwest SHO Specialists'"
<SHOtimes@midwestsho.com>; "'John Weidenbenner'" <johnjweid@earthlink.net>;
<shotimes@autox.team.net>
Sent: February 13, 2003 1:49 PM
Subject: Re: Handling was [Shotimes] RE: supercharging


> very true
>
> my 94 mtx sho has the tpr or 1/2 tpr bushing on the tension strut in the
> front, while my 95 SE has plain ole rubber ones. I think that is part of
the
> reason my sho feels a little rigid and almost to tight when driving, and
my
> se feels tight but smoother. Course my tension strut bushings in the from
on
> my SE are new rubber
>
> I am thinking that I might hold off on putting my 24mm in the front till
> I've gotten a chance to drive the whatever int the front/26mm in the rear
> with TPR.
>
> Till at least middle summer the tranny and clutch will be stock and stock.
I
> can wait till then to add my 24mm if ppl keep saying to much of understeer
> or oversteer...
>
> Thoughts?
>
> Bruce