Handling was [Shotimes] RE: supercharging

[Bruce Malachuk]

Realllllyyyy?


Hmmm I need to get a mic on the bar and see.

Thanks for info.

Bruce

----- Original Message -----
From: "Dave Kegel" <d.kegel@attbi.com>
To: "Bruce Malachuk" <bmalach1@nycap.rr.com>
Sent: Thursday, February 13, 2003 3:59 PM
Subject: Re: Handling was [Shotimes] RE: supercharging


> No, you should  have the 24mm bar.  I know of several 94 MTXs that came
with
> that bar.  '92 and '93 MTXs also have the 24mm front bar.
>
> Dave
> ----- Original Message -----
> From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> To: "Dave Kegel" <d.kegel@attbi.com>
> Sent: February 13, 2003 2:54 PM
> Subject: Re: Handling was [Shotimes] RE: supercharging
>
>
> > my 94 SHO MTX dosen't have a 24 in the front yet. I think stock for 94
> mtx's
> > was 20.3 or 20.5 or 22. I can't remember. I seem to recal hearing that
my
> 95
> > SE has a 19 or 20 in the front. I thought the only years ford used a
24mm
> in
> > the front was like 89-91? But I could be wrong?
> >
> > Bruce
> >
> > ----- Original Message -----
> > From: "Dave Kegel" <d.kegel@attbi.com>
> > To: <shotimes@autox.team.net>
> > Sent: Thursday, February 13, 2003 2:55 PM
> > Subject: Re: Handling was [Shotimes] RE: supercharging
> >
> >
> > > Are you referring to adding a front bar to your SHO or SE below?  If
> > you're
> > > referring to the SHO, a 94 MTX SHO almost certainly already has a 24mm
> > front
> > > bar.
> > >
> > > Dave Kegel
> > >
> > > ----- Original Message -----
> > > From: "Bruce Malachuk" <bmalach1@nycap.rr.com>
> > > To: "Ian Fisher" <ianf@eden.rutgers.edu>; "'Midwest SHO Specialists'"
> > > <SHOtimes@midwestsho.com>; "'John Weidenbenner'"
> > <johnjweid@earthlink.net>;
> > > <shotimes@autox.team.net>
> > > Sent: February 13, 2003 1:49 PM
> > > Subject: Re: Handling was [Shotimes] RE: supercharging
> > >
> > >
> > > > very true
> > > >
> > > > my 94 mtx sho has the tpr or 1/2 tpr bushing on the tension strut in
> the
> > > > front, while my 95 SE has plain ole rubber ones. I think that is
part
> of
> > > the
> > > > reason my sho feels a little rigid and almost to tight when driving,
> and
> > > my
> > > > se feels tight but smoother. Course my tension strut bushings in the
> > from
> > > on
> > > > my SE are new rubber
> > > >
> > > > I am thinking that I might hold off on putting my 24mm in the front
> till
> > > > I've gotten a chance to drive the whatever int the front/26mm in the
> > rear
> > > > with TPR.
> > > >
> > > > Till at least middle summer the tranny and clutch will be stock and
> > stock.
> > > I
> > > > can wait till then to add my 24mm if ppl keep saying to much of
> > understeer
> > > > or oversteer...
> > > >
> > > > Thoughts?
> > > >
> > > > Bruce
> > > _______________________________________________
> > > Shotimes mailing list
> > > Shotimes@autox.team.net
> > > http://www.team.net/mailman/listinfo/shotimes