[Shotimes] diagram for headl
Michael S Wojton
Mike.Wojton@owens-ill.com
Mon, 17 Feb 2003 09:55:00 -0500
I checked on these. They use 14 ga wire in their harnesses. I was told
by more than one person that they considered 14 ga marginal for higher
wattage bulbs. The bigger the better, I suppose; to a point. I am still
looking around.
Mike Wojton
Toledo, Ohio
-'95 Green MTX 3/01-1/03
ShoShop y-pipe
-'95 White Mtx
'96 Brake Upgrade
"Avoid the clap." - Jimmy Dugan
------------------( Forwarded letter 1 follows )---------------------
Date: Sun, 16 Feb 2003 12:59:04 -0800
To: shotimes@autox.team.net
Cc: mike.wojton, gtsrider@yahoo.com
From: sho2go[srfdude]@cox.net
Subject: Re: [Shotimes] diagram for headlamp harness (relays)
And if you don't want to roll your own, try this:
http://jen.liu.tripod.com/suvlights/id14.html
Mike
----- Original Message -----
From: "van Oss" <vanOss@centurytel.net>
To: <shotimes@autox.team.net>
Cc: <gtsrider@yahoo.com>; <mike.wojton@owens-ill.com>
Sent: Sunday, February 16, 2003 12:22 PM
Subject: [Shotimes] diagram for headlamp harness (relays)
> Mike and Peter asked where to find instructions for wiring up a headlamp
harness. I suggest:
>
> http://lighting.mbz.org/tech/relays/relays.html
>
> Joseph van Oss
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes