[Shotimes] loose bulb

[Mark Matthews]

There's high temp RTV (red) that they use on jet engines around some of
the ducting. That should withstand bulb temps without to much trouble.

Mark


-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of van Oss
Sent: Thursday, February 20, 2003 7:38 PM
To: shotimes@autox.team.net
Subject: [Shotimes] loose bulb

In my 91 SHOable, there's a problem with one of the lamp fixtures.  It
accepts a 194 bulb.  1 in 3 times that I shut the hood, the
vibration is enough to shake the bulb loose.  Any ideas how to keep the
bulb lodged in there a little stronger?  Thanks.

The offending fixture is in the Mercury Sable front-center "laser" bar
that I retrofitted onto my 91 SHO.  The lamp I actually use
might not technically be considered 194 although it's exactly the same
shape.  I go to Home Depot and buy the 18-watt bulbs intended
for landscape lights.

Is there some goop that would stand high bulb temps?  TIA for any help.

Joseph van Oss
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes