[Shotimes] rear antiswaybar mounting bushings

[Steve Weinrich]

You can use Energy Suspension Universal fit greasable poly sway bar bushings
found at AutoZone in the display area for about$17/pr .

My local store now stocks these in 1/8" increments from 7/8" to 1 1/4".  The
7/8" (part #  9-5158) will work okay on your 23 mm bar.  A better fit would
be the 23mm version part # 9-5159, but this is not available from AutoZone.

You can look these up in ES's online catalog through
http://www.suspension.com/s.b.bushings.htm

The drawback with these particular bushings is you will have to drill a new
forward mounting hole for the bracket, tap it, and provide a mounting bolt.

You could always give Josh at www.shonutperformance.com a try.  E-mail him
and see what he might have.

Steve




----- Original Message -----
From: "Michael Shelby" <mshelby@peoplepc.com>
To: <shotimes@autox.team.net>
Sent: Thursday, February 20, 2003 9:23 PM
Subject: [Shotimes] rear antiswaybar mounting bushings


> I need to find replacements for my stock rear anti sway bar mounting
bushings
> for my '94 SHO with a 23mm bar. I've hunted all over the place and all of
the
> aftermarket vendors carry the TRW parts which only fit 25-26mm bars and
> 18-19mm bars. My local ford dealer would be happy to order a set for me at
$20
> each, but they can't tell me what size bar they are for. Does anyone have
a
> part # or better yet a source for the correct part? (this is the bushing
that
> connects the bar to the body of the car).
>
> Thanks!
>
> If possible send a reply to my hotmail account as well.
> shelby_sho@hotmail.com
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes