[Shotimes] Re: Way OT Seagate drive utilities

[Paul L Fisher]

http://www.seagate.com/training/utilwiz/index.html

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 169K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley 
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus 
Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000 0W-30 
oil, Amsoil Synthetic ATF.
'00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 38K Build date 
11/19/1999
- Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6


Quoting Ian Fisher <ianf@eden.rutgers.edu>:

> Does Seagate offer a drive utility for setting up their drives? I have
> an 80gig Barracuda that I am trying to work with. Seagate's site is so
> moronic; I can't find anything except for a pdf file in their site.
> 
> This is the same PC that I posted about a month ago...I just haven't
> had
> the time to work on it until today. I think that the motherboard (ASUS
> P4B266) is bad but I am trying everything. It hangs when I enter XP's
> installation. (right after the menu for "press enter to install XP or
> R
> to repair..whatever I press, it hangs at that point)
> 
> Tested memory on DDR tester=fine
> Flashed BIOS with revised BIOS=better but still same problems
> Removed everything that wasn't essential to the computer..
> 
> Only working with 1 HD and 1CD ROM drive..
> 
> I am pretty frustrated considering that I used to do this as a
> job..Worse yet, I think my g/f thinks I don't know how to build a
> computer (its hers) grrrrrrr
> 
> thanks
> 
> Ian