[Shotimes] O2 Sensors

[Justin Schick]

Do you have the stock Y pipe or aftermarket? My experience is only with the latter. A regular wrench works fine. The sensors are the same, the only difference is the length of the pigtail.

Justin Schick - '92 SHO cruising around KC MO
187k and yes, it needs another clutch
SHOTimes list info: http://www.shotimes.com/SHO1.html


>>> "Jonathon Beisler" <JBEIS001@stvincentshealth.com> 01/07/03 09:45AM >>>
I am getting ready to replace the O2 sensors on my SHO.  I have two questions relating to this.  Firstly, do I have to have a special tool or will an appropriate size wrench work?  If so, what size?
Secondly, from where and how much should I expect to spend.  Napa stated that they were about 50 bucks and that you used the same type for each sensor.  Autozone, however stated that there where two different types of O2 sensors that needed to be used.  One "long" and one "short," whatever that means.  So,  what do I use?
Thanks, 
Jon B.
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net 
http://www.team.net/mailman/listinfo/shotimes