[Shotimes] O2 Sensors

[Steve Tatro]

About $40 each from Autozone, for the correct Bosch O2's.

They'll lend you a tool (maybe a $30 deposit?) that makes the job much
easier.

If you're doing an ATX good luck with the front one ;^)

Steve Tatro
Red/Black '93 with 164k miles
Cincinnati, Ohio
www.picturetrail.com/stevetatro


-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Jonathon Beisler
Sent: Tuesday, January 07, 2003 10:45 AM
To: shotimes@autox.team.net
Subject: [Shotimes] O2 Sensors


I am getting ready to replace the O2 sensors on my SHO.  I have two
questions relating to this.  Firstly, do I have to have a special tool
or will an appropriate size wrench work?  If so, what size? Secondly,
from where and how much should I expect to spend.  Napa stated that they
were about 50 bucks and that you used the same type for each sensor.
Autozone, however stated that there where two different types of O2
sensors that needed to be used.  One "long" and one "short," whatever
that means.  So,  what do I use? Thanks, 
Jon B.
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes