[Shotimes] Removing Rear Quarter Windows

[Midwest SHO Specialists SHOtimes]

Well I used the piano wire, just without the handles.  (My hands hurt when I
was done)  It is not necessary to have two people on those rear windows,
since you are so close to the door frame.  Just stick one arm on each side.
Also, 2 of the cars I did this on were 91's and they also had the bolts.
Did they start putting these on in the later years?

Mike Kopstain
Midwest SHO Specialists
827 North Chestnut Avenue
Arlington Heights, IL 60004
www.MidwestSHO.com
Sales@midwestsho.com
----- Original Message -----
From: "George Fourchy" <krazgeo@jps.net>
To: <shotimes@autox.team.net>
Sent: Sunday, January 12, 2003 9:26 PM
Subject: Re: [Shotimes] Removing Rear Quarter Windows


> On Sun, 12 Jan 2003 20:08:15 -0600, Midwest SHO Specialists SHOtimes
wrote:
>
> >Pull off the interior trim and there are 3 bolts under that holding the
> >window and trim on.  They should then just push right out.
>
> That might be the case for a Gen 2....I sure WISH it were for a Gen 1.
There was
> just glue everywhere, and I definitely did take the interior trim
off...actually
> someone else did, to get the headliner.  I don't think there are any
bolts.  All the
> other comments are valid regarding taking those suckers out, I'm afraid.
>
> I'll have to go see my painter and get his input...he did reuse my
original ones,
> and they're in fine and don't leak.  He probaby has one or the other of
those tools
> Alan mentioned.  He didn't have any help getting them out....the car was
prepared in
> my garage here at the house, where he was living at the time.
>
> George
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes