[Shotimes] RE: TCE lower control arm group buy

[Midwest SHO Specialists SHOtimes]

All the H braces I have seen have been welded in.  I'm not sure what Todd
recommends with his design, but I know that James Lindsey with Pro
Suspension recommends welding them in.  I've installed one and I welded it.

Mike Kopstain
Midwest SHO Specialists
827 North Chestnut Avenue
Arlington Heights, IL 60004
www.MidwestSHO.com
Sales@midwestsho.com
----- Original Message -----
From: "Kirk Doucette" <Kirk.doucette@verizon.net>
To: "Midwest SHO Specialists SHOtimes" <MidwestSHOspecialists@hotmail.com>;
"Paul L Fisher" <sho@paul-fisher.com>; "V8SHO" <v8sho@v8sho.com>; "SHOcago
(Topica)" <shocago@topica.com>; "SHOtimes (Team.net)"
<shotimes@autox.team.net>
Sent: Tuesday, January 14, 2003 11:55 PM
Subject: RE: [Shotimes] RE: TCE lower control arm group buy


> Since when do you weld in the H brace? Is this something new?
>
> Kirk J Doucette
> NESHOC President
> Stormtrooper-97 White
>
> -----Original Message-----
> From: Midwest SHO Specialists SHOtimes
> [mailto:MidwestSHOspecialists@hotmail.com]
> Sent: Wednesday, January 15, 2003 12:16 AM
> To: Kirk Doucette; Paul L Fisher; V8SHO; SHOcago (Topica); SHOtimes
> (Team.net)
> Subject: Re: [Shotimes] RE: TCE lower control arm group buy
>
> I beleive he is referring to the weld in H brace.
>
> Mike Kopstain
> Midwest SHO Specialists
> 827 North Chestnut Avenue
> Arlington Heights, IL 60004
> www.MidwestSHO.com
> Sales@midwestsho.com
> ----- Original Message -----
> From: "Kirk Doucette" <Kirk.doucette@verizon.net>
> To: "Paul L Fisher" <sho@paul-fisher.com>; "V8SHO" <v8sho@v8sho.com>;
> "SHOcago (Topica)" <shocago@topica.com>; "SHOtimes (Team.net)"
> <shotimes@autox.team.net>
> Sent: Tuesday, January 14, 2003 10:39 PM
> Subject: [Shotimes] RE: TCE lower control arm group buy
>
>
> > Rear knuckle brace? I wasn't aware that he did those, do you have pics?
> Does
> > he?
> >
> > Kirk J Doucette
> > NESHOC President
> > Stormtrooper-97 White
> >
> > -----Original Message-----
> > From: Paul L Fisher [mailto:sho@paul-fisher.com]
> > Sent: Tuesday, January 14, 2003 11:21 PM
> > To: V8SHO; SHOcago (Topica); SHOtimes (Team.net)
> > Subject: TCE lower control arm group buy
> >
> > I have talked to Todd Cook and he is willing to make sets of his rear
> > control arms for the SHO for $420 each shipped. He needs 5 or more
people
> to
> > pay in full up front before he will do it.
> >
> > In addition, he is willing to make up sets of his rear knuckle braces
for
> > $75 a piece as well. Minimum order for those is 5 as well.
> >
> > I will post pictures and a description tomorrow and will post a link to
> > them.
> >
> > Please let me know who is interested. He mentioned he could deliver
> > approximately 30 days after he gets the money.
> >
> > I offered to be the clearing house.
> >
> > Paul L Fisher
> > '93 Ford Taurus SHO Crimson Clearcoat ATX 170K Build date 11/18/1992
> > - K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back,
> Holley
> > 190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
> > Stainless Steel Y-pipe, Delrin sub-frame bushings, Amsoil Series 2000
> 0W-30
> > oil, Amsoil Synthetic ATF.
> > '00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 39K Build date
> > 11/19/1999
> > - Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit
> >
> > SHO Club member http://www.shoclub.com/
> > Check out my web site http://www.paul-fisher.com/
> > Amsoil dealer http://www.paul-fisher.com/oil.htm
> >
> > Get $5 free from Paypal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes