[Shotimes] When did we last discuss 3.4 > MTX?

[Ian Fisher]

Why go through the trouble of using the MTX-IV when the MTX-75 has the
same bellhousing bolt pattern already?

Ian

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Al Fitz
Sent: Sunday, January 18, 1998 11:26 PM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] When did we last discuss 3.4 > MTX?


The sub frames of the GEN II and GEN III are very close to the same
size. The ATX in the GEN III could easily be replaced with an MTX as far
as space is concerned. The 3.4 does not have the same bolt pattern as
the 3.0, but like you said, an adaptor could be made. I guess the 3.4
could be installed in any SHO. Converting the GEN II from ATX to MTX is
made easier by having the mechanical connections, like the clutch pedal
mounts already there. For the GEN III, there would be some fair amount
of fabricating to do. It sounds like an interesting project and I'd love
to see it happen.

Al Fitz SHO Specials
http://www.alfitz.com


----- Original Message -----
From: "David P" <jpotter8@bellsouth.net>
To: "Paul L Fisher" <sho@paul-fisher.com>; "SHOtimes"
<shotimes@autox.team.net>; "V8 SHO" <v8sho@v8sho.com>
Sent: Wednesday, January 22, 2003 7:30 AM
Subject: [Shotimes] When did we last discuss 3.4 > MTX?


> I was wondering if anyone has looked at the feasibility of fitting the
3.4L
> to an MTX in the Gen1/2. I'm not concerned about the mating part as
adaptor
> plates and mounts can be fabricated, and cranks can be bored/tapped, 
> but
was
> interested in whether or not there is enough room to fit the motor in
there.
> Also, is there room to bore the motor out to say, 3.8L? I'm thinking 
> that
a
> 260hp (NA) severely lightened Gen2 with a v8 sound would be a nice, 
> fun ride to putter around in. What's the weight of the V8 again?
>
> David P
>
> 95MTX
>
>
>
> ~
> ----- Original Message -----
> From: "Paul L Fisher" <sho@paul-fisher.com>
> To: "SHOtimes" <shotimes@autox.team.net>; "V8 SHO" <v8sho@v8sho.com>
> Sent: Wednesday, January 22, 2003 08:02
> Subject: [Shotimes] Stupid eBayer
>
>
> > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2400886775
> >
> > This was listed on eBay last week with SVT in the title. I wrote the
> seller,
> > a dealership, that SHO's had nothing to do with SVT. Anyhow, the 
> > listing expired and they re-listed it with SVT in the title.
> >
> > In case no-one has anything better to do, I sent them another email,

> > you might want to as well!!
> >
> > Paul L Fisher
> > '93 Ford Taurus SHO Crimson Clearcoat ATX 170K Build date 11/18/1992
> > - K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back,
> Holley
> > 190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, 
> > Performance-Plus Stainless Steel Y-pipe, Delrin sub-frame bushings, 
> > Amsoil Series 2000
> 0W-30
> > oil, Amsoil Synthetic ATF.
> > '00 Ford Explorer XLT 5.0L V8 AWD Oxford White Clearcoat 34K Build 
> > date 11/19/1999
> > - Amsoil Series 2000 0W-30 oil, K&N Fuel Injection Performance Kit
> >
> > SHO Club member http://www.shoclub.com/
> > Check out my web site http://www.paul-fisher.com/
> > Amsoil dealer http://www.paul-fisher.com/oil.htm
> >
> > Get $5 free from Paypal! 
> > https://www.paypal.com/refer/pal=P3XEFFBFUFKN6
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes