[Shotimes] sho shop hi flow cats ..they flow ?

[Erik Balser]

That's correct Don.  I was wondering the exact same thing when I went to put
my SS y-pipe on a while ago.  So I called the Sho Shop and asked just to
make sure when I was putting it on.  They told me they are universal cats
and it doesn't matter which way they are put on.  What else do you have for
an exhaust after the y-pipe?  I found that the rasp was horrible after
installing my y-pipe although the extra HP was very nice.  Recently I
changed out my dynomax cat-back system with the following:  dynomax
resonator (from cat-back system) right after the flex joint, followed by a
MagnaFlow resonator after the gear box, and then topped off with two
Flowmaster mufflers.  The tone is awesome and I like the setup more and more
as I drive it.  The extra resonator reduces the rasp to almost nothing and
the tone is nice.  Have fun with your y-pipe!

'95 MTX
masho95
http://webpages.charter.net/masho95

----- Original Message -----
From: "don donelson" <1badsho@thenuthouse.com>
To: <shotimes@autox.team.net>
Sent: Friday, January 24, 2003 2:34 PM
Subject: [Shotimes] sho shop hi flow cats ..they flow ?


> I bought a high flow cat system from ron p and put it on the car last
night.
>
> I posted a few days ago about the cats .... I know some cats are
directional
> .... in other words they have flow one way.
>
> The cats from the SHO SHOP showed no markings .... at all ... and look
> identical on both ends ..... so I assumed it didnt matter which end went
> were  ... correct ?
>
>
> dond
> 91 Super SHO II
>
> All work & assembly done by yours truly  : )
>
> -3.2 ATX block
> -FPS hi-flow heads w/  over sized valves
> -Stage I cams
> -SHONUT adjustable timing sprockets
> -Ported intake & runners
> -Ported and extrude honed exhaust manifolds
> -Hi-flow catless Y pipe
> -Hi-flow exhaust
> -BBB
> -SHO SHOP T.B.
> -SHONUT phenolic spacers
> -Quaife
> -CAI
> -UDP
> ****
> -Cowl hood
> -Momo 17x8 rims
> -Police grill
> -Custom two tone interior
> -Complete sunpro gauges
> oil temp / water temp / oil pressure
> ****
> -Tokico shocks/Eibach springs
> -Polyurethane at all corners
> -Solid-sub frame bushings
> -Frame stiffners
> -Adjustable rear control arms
> -Battery located in trunk for better weight distrubution
> ****
> -12" rotors at all four corners
> -Steel braided lines
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes