[Shotimes] sho shop hi flow cats ..they flow ?

[David P]

We should compare exhaust notes. I am running a single crossflow flowmaster
with dynomax in the same spot, and currently the stock sho resonator after
the flex pipe.


David P

95MTX



~
----- Original Message -----
From: "Erik Balser" <masho95@charter.net>
To: "don donelson" <1badsho@thenuthouse.com>; <shotimes@autox.team.net>
Sent: Friday, January 24, 2003 14:53
Subject: Re: [Shotimes] sho shop hi flow cats ..they flow ?


> That's correct Don.  I was wondering the exact same thing when I went to
put
> my SS y-pipe on a while ago.  So I called the Sho Shop and asked just to
> make sure when I was putting it on.  They told me they are universal cats
> and it doesn't matter which way they are put on.  What else do you have
for
> an exhaust after the y-pipe?  I found that the rasp was horrible after
> installing my y-pipe although the extra HP was very nice.  Recently I
> changed out my dynomax cat-back system with the following:  dynomax
> resonator (from cat-back system) right after the flex joint, followed by a
> MagnaFlow resonator after the gear box, and then topped off with two
> Flowmaster mufflers.  The tone is awesome and I like the setup more and
more
> as I drive it.  The extra resonator reduces the rasp to almost nothing and
> the tone is nice.  Have fun with your y-pipe!
>
> '95 MTX
> masho95
> http://webpages.charter.net/masho95
>
> ----- Original Message -----
> From: "don donelson" <1badsho@thenuthouse.com>
> To: <shotimes@autox.team.net>
> Sent: Friday, January 24, 2003 2:34 PM
> Subject: [Shotimes] sho shop hi flow cats ..they flow ?
>
>
> > I bought a high flow cat system from ron p and put it on the car last
> night.
> >
> > I posted a few days ago about the cats .... I know some cats are
> directional
> > .... in other words they have flow one way.
> >
> > The cats from the SHO SHOP showed no markings .... at all ... and look
> > identical on both ends ..... so I assumed it didnt matter which end went
> > were  ... correct ?
> >
> >
> > dond
> > 91 Super SHO II
> >
> > All work & assembly done by yours truly  : )
> >
> > -3.2 ATX block
> > -FPS hi-flow heads w/  over sized valves
> > -Stage I cams
> > -SHONUT adjustable timing sprockets
> > -Ported intake & runners
> > -Ported and extrude honed exhaust manifolds
> > -Hi-flow catless Y pipe
> > -Hi-flow exhaust
> > -BBB
> > -SHO SHOP T.B.
> > -SHONUT phenolic spacers
> > -Quaife
> > -CAI
> > -UDP
> > ****
> > -Cowl hood
> > -Momo 17x8 rims
> > -Police grill
> > -Custom two tone interior
> > -Complete sunpro gauges
> > oil temp / water temp / oil pressure
> > ****
> > -Tokico shocks/Eibach springs
> > -Polyurethane at all corners
> > -Solid-sub frame bushings
> > -Frame stiffners
> > -Adjustable rear control arms
> > -Battery located in trunk for better weight distrubution
> > ****
> > -12" rotors at all four corners
> > -Steel braided lines
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes