[Shotimes] CAI snorkel project

[Paul Nimz]

On my '97 I use a rubber 4" plumbing 90 el.  It will deform to fit through
the opening and the bell ends will accept the 4" filter and a 4" duct.

Paul Nimz
'97 TR SHO
'93 EG mtx SHO


----- Original Message -----
From: "Erik Balser" <masho95@charter.net>
To: <shotimes@autox.team.net>
Sent: Sunday, January 26, 2003 2:33 PM
Subject: [Shotimes] CAI snorkel project


> Well the CAI project continues... Thought I had all the parts I needed to
> finish putting this thing together.  The pvc tube I got to go through the
> plate I made that attaches to the fender well is a little bit short to
have
> the rubber tube I got and have the air filter attached too.  Quick
question,
> for those of you that have the SS snorkel, how did you get the air filter
> inside the fender well???  Do you have to remove the tire and splash
guard?
> Obviously the air resonator won't come out any other way, and I didn't see
> any other way to get the filter in either.   Sounds a little riduculous to
> have to remove the tire and splash guard every time you need to remove the
> air filter...thanks for any help!
>
> '95 MTX
> Erik B.
> http://webpages.charter.net/masho95
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes