[Shotimes] Yamaha Badges on

[Jim and Debbie Leyden]

I wouldn't think that would be very difficult to turn those up out of steel
and have them chromed.  If you have a print of them, send it to me and I'll
see if I can find someone to make some up and how much for how many.

Jim
'93 MTX


----- Original Message -----
From: "Michael S Wojton" <Mike.Wojton@owens-ill.com>
Cc: <techsho@topcia.com>; <shotimes@autox.team.net>
Sent: Monday, January 27, 2003 11:38 AM
Subject: Re: [Shotimes] Yamaha Badges on


> No these are different.  These are about 1 1/2" in diameter.  They have
the
> "tuning fork" Yamaha logo on them.  Hrinsin removed the DOHC emblems
> from his front fenders and put these on.  I was going to put these above
> the DOHC emblems, because he said the paint was slightly wavy under
> the ones he took off.  Some rubbing compound smoothed it out, but I didn't
> want to take any chances.  Compared to the DOHC badges, the Yamaha logos
> looked like stickers.  I wanted to have an emblem type look.  The guy who
> was going to make them for me has had the sketches for about 8 months
> now and hasn't done anything with them.  Maybe it's time to find somebody
> else to do it.
>
>
> Mike Wojton
> Toledo, Ohio
> shomike@tri-statesho-svt.org
>
> '95 MTX  R.I.P
>
> "Avoid the clap." - Jimmy Dugan
>
> ------------------( Forwarded letter 1 follows )---------------------
> Date: Mon, 27 Jan 2003 11:27:03 EST
> To: Mike.Wojton
> Cc: techsho@topcia.com, shotimes@autox.team.net
> From: KICKINSHO@aol.com
> Subject: Re: [Shotimes] Yamaha Badges on Ebay
>
> In a message dated 1/27/2003 7:26:11 AM Central Standard Time,
> Mike.Wojton@owens-ill.com writes:
>
> > The ones from the Yamaha dealer aren't really "badges" either.  They're
more
> > like "thick" stickers.  I bought a pair for my other car.  I decided I
> > didn't
> > want
> > to put them on like they were.  I'm trying to get someone here at work
to
> > make
> > up a "holder" for each that the "badge" will go into.  This will make it
> > look
> > more like a real emblem.
> >
> > It's a matter of preference though.
> >
> >
> > Mike Wojton
> >
>
> I purchased some from Al a while back for my '93.  If these are the same
type
> "thick sticky type badges" you are talking about, we removed the Ford
one's
> with a blow dryer and then put the Yamaha badges in place.  They look
good.
> My '91 already had them on it.
>
>
> Kris
> '91+ White
> '93 Ultra Red ATX
>
> [demime 0.99d.1 removed an attachment of type application/octet-stream
which had a name of UnNamed.html]
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes