[Shotimes] Front Hub Studs
mhelpinstill@ampro.net
mhelpinstill@ampro.net
Mon, 30 Jun 2003 20:28:39 -0700
Just replaced the front hub and bearing on my 94 SHO and discovered the
studs are about 3/8" shorter than original (Timken bearing kit). After
I knocked the studs out of the old hub, I tried to install them in the
new hub and found that the old studs are larger diameter. Can I just
ream out the holes on the new hub or should I search for longer studs of
the right diameter, or I guess I could just live with the shorter studs,
although the nut barely makes full thread contact.
Mark