[Shotimes] Front Hub Studs

[Kevin & Cheryl Airth]

Mark:
 I have run into this also. To get the proper length stud I had to order the
part in from Ford. They are pretty cheap about $2 each and come in a pack of
5.
F6DZ-1107-AA
.
.



> Just replaced the front hub and bearing on my 94 SHO and discovered the
> studs are about 3/8" shorter than original (Timken bearing kit).  After
> I knocked the studs out of the old hub, I tried to install them in the
> new hub and found that the old studs are larger diameter.  Can I just
> ream out the holes on the new hub or should I search for longer studs of
> the right diameter, or I guess I could just live with the shorter studs,
> although the nut barely makes full thread contact.
>
> Mark