[Shotimes] 96+ PFCM brake pads

[Paul L Fisher]

No, 5984 (old number) or 0598.20 (new number) are the correct size. Ask for
an '97 Ford Thunderbird SC or a '01-'02 Taurus.

Paul L Fisher
'93 Ford Taurus SHO Crimson Clearcoat ATX 175K Build date 11/18/1992
- K&N Panel filter, Tokico Struts, Eibach Springs, Dynomax cat-back, Holley
190lph fuel pump, FPS rebuilt ATX, 26mm rear sway bar, Performance-Plus
Stainless Steel Y-pipe, '96 brake upgrade, Proportioning valve plugs, Delrin
sub-frame bushings, Amsoil Series 2000 0W-30 oil, Amsoil Synthetic ATF.

SHO Club member http://www.shoclub.com/
Check out my web site http://www.paul-fisher.com/
Amsoil dealer http://www.paul-fisher.com/oil.htm

Get $5 free from PayPal! https://www.paypal.com/refer/pal=P3XEFFBFUFKN6

----- Original Message ----- 
From: <Mike.Wojton@us.o-i.com>
To: <shotimes@autox.team.net>
Sent: Tuesday, July 01, 2003 8:28 AM
Subject: [Shotimes] 96+ PFCM brake pads


> I apologize if this has been brought up recently.
>
> Autozone doesn't carry the PFCM brake pads for the 96 SHO brakes.
> The brake survey on the FAQ says to use #6014 pads.  Is this a good
> thing?  Are these the correct size for these rotors?
>
>
> Mike Wojton
> Toledo, Ohio
>
> -'95 Green MTX  3/01-1/03
>    ShoShop y-pipe
>
> -'95 White MTX
>    '96 Brake Upgrade
>
> "Avoid the clap." - Jimmy Dugan
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.491 / Virus Database: 290 - Release Date: 6/18/2003