[Shotimes] Re: Front Springs

[Ron Porter]

I have a PDF from last year that someone sent along. I'll forward it to you.

Ron Porter 

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of fwhittle@mindspring.com
Sent: Wednesday, July 02, 2003 8:58 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Re: Front Springs


I'm pretty sure the front springs on my '95 ATX have "SCH" on them.  Does
anyone have the list of spring codes and specs that I saw here a while back?

Frank Whittle
'95 ATX
  
From: "Kevin & Cheryl Airth" <clubairth@peoplepc.com>
To: "sho2go" <srfdude@cox.net>, <shotimes@autox.team.net>
Date: Wed, 2 Jul 2003 14:01:03 -0500
Subject: [Shotimes] Front Springs

My 93 ATX came stock with "JIT" front springs. My wife's 93 ATX came with
"KMO".

Has anybody found "MUZ" load rating = 1054 lb or "SAF" load rating = 1103
lb? Both are 200lb/inch springs.
It still is a mystery to me how Ford used springs? They so many but
nowhere
can I find why the small differences. If the car was not at correct ride
height from the factory would they change springs to get it level or
correct? I have a TSB with 1.5 pages listing at least 50 different spring
codes for Taurus/SHO/Sable. The cars are all identical with very small
differences in weight, why so many ? As cheap as Ford was/is they must of
had a use for all this variation.
.
.



> Actually, when Ford was putting the designed springs in, and not
whatever
> was left over, I think they did pay attention to ATX vs MTX.  My MTX and
> others I've seen had the JIT springs, which while having a 200lb/in
rate,
> were load rated at 954 lbs.  Others that had ATXs had KMO front springs,
> also rated at 200lb/in.  but load rating of 1004 lbs.  These would
> definitely be taller than the JITs so the added front weight would take
them
> down to the same height as the MTX springs.
> Mike
>
>

>
> > Mike:
> >  The ATX is slightly heavier but Ford makes no distinction in the
springs,
> > just the wagon .VS. sedan. If you can get the spring codes I can
decode
> them
> > for spring rates.
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes